Bosch HDS8055U Installation Instructions - Page 14
Install Appliance
View all Bosch HDS8055U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Check supply line connections for leaks using a soap solution or non-corrosive leak detection fluid. Do not use a flame of any sort. 9 WARNING Install a gas shut off valve near the appliance. After installation, it must be easily accessible in an emergency. 1. Turn on gas. 2. Apply a soap solution or non-corrosive leak detection fluid to all joints and fittings in the gas connection between the shut-off valve and the cooktop. Include gas fittings and joints in the cooktop if connections may have been disturbed during installation. Bubbles appearing around fittings and connections indicate a leak. 3. If a leak appears, turn off supply line gas shut-off valve and tighten connections. 4. Retest for leaks by turning on the supply line gas shutoff valve. When leak check is complete (no bubbles appear), test is complete. 5. Wipe off all soap solution or detection fluid residue. Important Notes for Gas Connection: ▯ The appliance and its individual gas shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psi (3.5kPa). ▯ The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi (3.5kPa). Install Appliance 9 WARNING TIP OVER HAZARD A child or adult can tip the range over and be killed. Install the anti-tip device to the structure and/or the range. Verify the anti-tip device has been properly installed and engaged. Engage the range to the anti-tip device. Ensure the anti-tip device is reengaged when the range is moved. Re-engage the anti-tip device if the range is moved. Do not operate the range without the anti-tip device in place and engaged. See installation instructions for details. Failure to follow the instructions in this manual can result in death or serious burns to children and adults. Check for proper installation and use of the anti-tip bracket. Carefully tip the range forward pulling from the back to ensure that the anti-tip bracket engages the range leg and prevents tip-over. The range should not move more than 1" (2.5cm). Installing the anti-tip bracket 1. Ensure that the electrical connection and the gas connection are in the correct position. 2. Assemble the bracket. 14