Bosch HSD5051UC Installation Instructions - Page 4

Installation Before you Begin Tools and Parts Needed • T-20 star head screwdriver • Measuring tape • Drill with bit (1/8") Parts Included • T-20 star head screws, #8x1/2" (6) General Information Flush Installation 7RS YLHZ ò ô  UHYHDO &OHDWV ô  UHYHDO &OHDWV )OXVK LQVHW GHSWK   ò    6LGH YLHZ  UHYHDO FOHDWV   )OXVK FXWRXW KHLJKW ò  PHDVXUHPHQWV LQ LQFKHV PP Installation Dimensions Instructions are based on standard (in the U.S.A.) cabinets 36" (914 mm) high and 24" (609 mm) deep with a 25" (635 mm) countertop. If using non-standard cabinets, alter dimensions accordingly. 30" Storage Drawer Unit and Cabinet Dimensions Cabinet opening bottom must be able to support 110 pounds (50 kg). 281/2" (724) 97/16" (240) 231/2" (597) 293/4" (755) 283/16" (716) 91/16" (230) 43/4"-38" (121-964) 231/2" (597) 241/2" (622) 185/8" (473) Measurements in inches (mm) 1/2" (13) 91/4" (235) Installation Procedure 9 CAUTION Before installing with a microwave or steam oven, turn power OFF at the service panel. Lock service panel to prevent power from being turned ON accidentally. Installing with Microwave or Steam Oven Pre-Assembly Preparation Mounting the microwave or steam oven on the storage drawer requires the units to be assembled together prior to installing into the cabinet cutout. Note: The parts contained in the square tube parts box are common to both installations. Parts Provided Universal connector bracket (2) (in parts box) Screws (16) (in red bag, inside parts box) English 2