Bosch SRX53C15UC Instructions for Use - Page 65
Tools Needed, Materials Needed
View all Bosch SRX53C15UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
TOOLS NEEDED Tools and Materials Needed Hammer Hole Saw Pipe Wrench Adjustable Wrench Tape Measure Slot Screwdriver Phillips Screwdriver T-20 Screwdriver Wire Cutter Wire Stripper Drill Level MATERIALS NEEDED (Additional materials may be required to comply with local codes.) Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper conductors rated 75°C or higher. Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided dishwasher supply line. Shut-off valve and fittings appropriate for hot water supply line (copper tubing/ compression fitting, or braided hose). Teflon brand tape or other pipe thread compound to seal plumbing connections. UL listed conduit connector or strain relief. Although a strain relief is included on the junction box, a separate strain relief may be required if you attach the field wiring directly to the terminal block. 2