Bosch SRX53C15UC Instructions for Use - Page 8
Preparing and Loading the Dishware
View all Bosch SRX53C15UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Preparing and Loading the Dishware (continued) Loading the Top Rack Figure 1 shows a typical mixed load for the top rack. Figure 1 9 place setting RACKMATIC™ Top Rack Height Adjustment The top rack can be lowered to accommodate large items in the top rack, and raised to make room for large items in the bottom rack. To lower the top rack: 1. Pull the top rack out of the dishwasher until it stops rolling. 2. Press the RACKMATIC™ handles inward as shown in Figure 2 and let the rack drop. Figure 2 To raise the top rack: 1. Pull the top rack out of the dishwasher until it stops rolling. 2. Grasp the top of the rack above the RACKMATIC™ handles and pull it upward as shown in Figure 3 until the RACKMATIC™ handles lock the rack into position (you do not need to press the RACKMATIC™ handles in order raise the rack). Figure 3 NOTE: Before you push the top rack back into the dishwasher, ensure that the rack height is the same on both sides. Otherwise, the dishwasher door will not shut and the top rack spray arm will not connect to the water circuit. 3. Push the top rack back into the dishwasher. Cup Shelf In addition to cups, the cup shelf can also hold large utensils. Grasp the cup shelf as shown in Figure 4 and fold it down. Place cups upside-down on the cup shelf. Figure 4 6