Bosch TAS4511UC Instructions for Use - Page 9
Activate MAVEA memo display, Your TASSIMO machine is now ready, for use.
UPC - 825225866312
View all Bosch TAS4511UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
EN 2 - 3x 7 Holding it over the sink, fill the filter holder with fresh, cold water and let it filter through. Please repeat this procedure two to three times. max max calc calc Tip: If only one bar is visible, please purchase a new filter cartridge. The MAVEA MAXTRA cartridges may be obtained from various retailers or from TASSIMO Customer Service Department at 1-877-TDISCS1 or only in the USA on www.tassimo.com. Now place the filter holder with filter cartridge back into the water tank and fill the tank with water. Activate MAVEA memo display For maximum filter performance and antiscale protection, the MAVEA MAXTRA filter cartridge must be replaced every 8 weeks. To ensure this is done, the cover of the water tank has a built-in MAVEA memo display. It tells you by means of bars when the filter cartridge should be replaced. To activate the MAVEA memo display, please press and hold the start button until the four bars briefly light up twice in the display area. The blinking dot in the lower right corner tells you that the memo display is working. All four bars should be visible. Every two weeks from activate, one bar will disappear. If no bars are visible after eight weeks and the arrow is blinking, please replace the filter cartridge. To remove the filter cartridge, pull it upwards on its tab. When preparing to use a new filter cartridge, please proceed as described in the section "Preparing and inserting MAVEA MAXTRA filter cartridge" and reset the MAVEA memo display. Your TASSIMO machine is now ready for use. 7/2009 TAS45 USA 090724.indd 7 24.07.2009 11:22:55