Bosch VDC-455V04-20 Installation Instructions - Page 21

FlexiDomeVF | Installation Manual EN | 21 Installer Settings Install menu Function SET FOCUS NOW COMM DEFAULTS EXIT Selection ON, OFF Select submenu Description Forces the lens to fully open the iris. Adjust the lens focus now. Bilinx communication ON/OFF Return all settings for all modes to factory defaults Exit the menu Adjustment procedure DC-iris Lens: 1. Unlock the focus locking screw. 2. SET BACK FOCUS NOW is highlighted in the menu. 3. Turn the focus adjustment as required. 4. Lock the focus locking screw. 5. Exit the menu selection. Defaults submenu Function ALL DEFAULTS Selection EXIT Description Select to restore the factory defaults. A confirmation screen appears. Allow 5 seconds for the camera to optimize the picture after a mode reset. Exit the menu Camera control communication This camera is equipped with a coaxial communications transceiver. In combination with VP-CFGSFT, the camera can be adjusted from the headend side of the coaxial cable. All menus can be accessed remotely giving full control of the camera. With this communication it is also possible to disable the local keys on the camera. To avoid loss of communication on an installed camera, the Communication ON/OFF selection is not available while using remote control. This function can only be accessed with the camera buttons. Bosch Security Systems | 2005-11 | V1.0