Bosch WFL2090UC Use & Care Manual - Page 22
Cleaning water, inlet strainers - 22
![]() |
UPC - 825225843702
View all Bosch WFL2090UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Cleaning water inlet strainers This is necessary if very little or no water flows into the washing machine. First release the water pressure in the supply hoses: q Turn off the water taps. q Turn the program selector to any program (except Spin or Drain). q Press the Start button, and allow the program to run for approx. 40 seconds. q Turn the program selector to Off. Cleaning the strainer(s) at the water tap On both the hot and cold water tap: Cleaning the strainers on the washing machine On both the hot and cold water tap: q Disconnect the hose from the back of the washing machine. q Disconnect the hose from the water tap. q Rinse the strainer under flowing water. q Reconnect the hose. q Pull out the strainer and rinse under running water. q Insert the strainer and reconnect the hose. q Turn on the water tap and check whether water is still discharged. If water is still discharged, check that the strainer is attached properly. q Turn off the water tap. 22
![](/manual_guide/products/bosch-wfl2090uc-use-care-manual-8b86870/22.png)