Bosch WFL2090UC Use & Care Manual - Page 31

max. 39" (100 cm) max. 39" (100 cm) Hose and cable lengths LeftĆhand connection approx. 39" (100 cm) approx. 56½"(145 cm) approx. 35" (90 cm) RightĆhand connection approx. 56½" (145 cm) approx. 39" (100 cm) approx. 48¾" (135 cm) Other hoses Available from specialty dealers: - Extended supply hose (approx. 2.2 m // 86.6 in). Water connection Water supply CAUTION The washing machine must only be operated with cold and hot (max. 140 °F // 60 °C) tap water. Do not connect the appliance to the mixer tap of an unpressurized hotĆwater boiler. If in any doubt, have the water connection carried out by an authorized technician. The water supply hoses must not be: - Bent or squashed. - Modified or cut through (stability can no longer be guaranteed). Plastic threads must only be tightened by hand. Do not remove the strainers from the water supply hoses. Observe the water pressure in the supply network: - The water pressure should be between 14.5 to 145 p.s.i. (1 to 10 bars) (when the tap is turned on, at least 2.2 U. S. gallons (8 liters) of water is discharged per minute). - A pressure reducing valve must be installed if the maximum water pressure is exceeded. CAUTION To protect against water demage, the hot and cold water valves should be accessible when the washer is in place and should always be turned off when the washer is not in use. When washer is being installed in new construcĆ tion, or a building that has had its plumbing sysĆ tem recently installed or upgraded, the lines must be flushed prior to installing the washer. This must be done to clear the lines of any sand, dirt or residue that may still be in the lines. 31