Bosch WFL2090UC Use & Care Manual - Page 34

WARNING To reduce the risk of fire or electrical shock, DO NOT use an extention cord or an adapter to connect the washer to the electrical power supply. In the event that an earthĆleakage circuit breaker is to be used, only use types marked with the following symbol: 7. Only this symbol can guarantee compliance with all current regulations. Do not insert / remove the mains plug with wet or damp hands. Handle the plug body only when removing the plug from the socket. Transport, e.g. when moving Before transporting the washing machine: - Turn off the water tap, - Drain any residual water (refer to page 20), - Release the water pressure in the supply hose (refer to page 22), - Disconnect the washing machine from the mains. - Dismantle the supply and drainage hose, - Install the lower 2 transport bolts. Having transported the appliance and ensured proper installation and connection, allow the Drain program to run through before starting the first wash program. Preparing and inserting the transport bolts q Remove the 2 lower covers. q Prepare the transport bolts: Loosen the screw in the sleeve until the end of the screw is level with the end of the sleeve. q Insert and tighten transport bolts 1 and 2. The lug on the washing machine must be located in the groove in the rear panel of the housing. 34