Bosch WFL2090UC Operating, Care, Installation - Page 22

Cleaning water inlet strainers This is necessary if very little or no water flows into the washing machine. First release the water pressure in the supply hoses: q Turn off the water taps. q Turn the program selector to any program (except Spin or Drain). q Press the Start button and allow the program to run for approx. 40 seconds. q Turn the program selector to Off. Cleaning the strainer(s) at the water tap On both the hot and cold water tap: Cleaning the strainers on the washing machine On both the hot H and cold C water tap: q Disconnect the hose from the back of the washing machine. q Disconnect the hose from the water tap. q Rinse the strainer under flowing water. q Reconnect the hose. q Pull out the strainer and rinse under running water. q Insert the strainer and reconnect the hose. q Turn on the water tap and check whether water is discharged. If water is discharged, check that the strainer is inserted properly. q Turn off the water tap. 22