Bosch WFL2090UC Operating, Care, Installation - Page 29

BuiltĆin, Installation, Leveling, procedure - dryer

Page 29 highlights

BuiltĆin Installation The appliance can be builtĆin; that is, you can install the washing machine underĆcounter in a kitchen cabinet opening. Leveling procedure All feet of the appliance must be placed firmly on the ground. The washing machine must not wobble. a 570 mm minimum // 22 7/16" b 600 mm minimum // 23 5/8" c 850 mm minimum // 33 1/2" Minimum Installation Clearances Alcove or Under Counter Counter Closet Sides 0" (0 mm) 0" (0 mm) Top 0" (0 mm) 0" (0 mm) Rear 0" (0 mm) 0" (0 mm) Front 0" (0 mm) 0" (0 mm) Note: Closet with dryer, please check the openings and ventilation requirements for the dryer. Level the washing machine with the assistance of the four adjustable feet and a spirit level: q Loosen the lock nut 1 using the wrench. q Adjust the height by means of turning the appliance foot 2. q Tighten lock nut 1 against the housing. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

29
BuiltĆin
Installation
The
appliance
can
be
builtĆin;
that
is,
you
can
install
the
washing
machine
underĆcounter
in
a±kitchen
cabinet
opening.
a
570
mm
minimum
//
22
7
/
16
"
b
600
mm
minimum
//
23
5
/
8
"
c
850
mm
minimum
//
33
1
/
2
"
Minimum
Installation
Clearances
Alcove
or
Under
Counter
Counter
Closet
Sides
0"
(0
mm)
0"
(0
mm)
Top
0"
(0
mm)
0"
(0
mm)
Rear
0"
(0
mm)
0"
(0
mm)
Front
0"
(0
mm)
0"
(0
mm)
Note:
Closet
with
dryer,
please
check
the
openings
and
ventilation
requirements
for
the
dryer.
Leveling
procedure
All
feet
of
the
appliance
must
be
placed
firmly
on
the
ground.
The
washing
machine
must
not
wobble.
Level
the
washing
machine
with
the
assistance
of
the
four
adjustable
feet
and
a
spirit
level:
q
Loosen
the
lock
nut
1
using
the
wrench.
q
Adjust
the
height
by
means
of
turning
the
appliance
foot
2
.
q
Tighten
lock
nut
1
against
the
housing.