Bose 10.2 Series II Owner's guide - Page 3
Bose 10.2 Series II Manual
View all Bose 10.2 Series II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
• 1)ontheleft and the right speaker (Part 2) on the right side. Note: Failure to follow this instruction will defeat the Direct/Reflecting3 speaker technology. C. The Bose° 10.21m Series II system is not very sensitive to placement relative to room walls. However, this distance can affect any speaker's frequency response. Therefore, it is wise to experiment with various locations before determining final placement. A typical location would be at least 3 inches(8 cm) from the wall behind the speaker; this distance will give the best sound in most situations. Placing the 10.2 Series II speaker less than three inches from the wall may block the two round openings in the rear of the speaker, affecting its low-frequency response. Figure 1B. Stereo listening area produced by conventional speaker systems. A. Select the wall where you intend to place your speakers. Divide thelength of the wall by four and place the speakersat the ye and3/4 divisionsof the wall.Inmost listening rooms. separa- tions as great as 12 feet (4 meters) or as small as three feet (1 meter) can still give excellent results. Refer to Section IV-B (Room Acoustics) for more information on speaker placement. B. Once you have selected your speaker locations, place the left speaker (Part D. Please note that each Bose° 10.2 SeriesII speaker hasamidrange driver located on the side of the speaker cabinet that facestheother speaker.Bose doesnot recommend theplacingof largeobjects(such asa tall cabinet) within one foot (30 cm) of the inward facing sideof either 10.2 SeriesII speaker, asthemidrange driver may be obstructed. 3