Bose 43478 User Manual - Page 37

USING SYSTEM MENUS English Español Français USING SYSTEM MENUS ADAPTiQ® Expansion Protocol Change this only if instructed in the owner's guide supplied with your Bose® link remote control. CBL•SAT/VCR Audio (Available only if the TV-to-VS-2 connection is HDMITM.) Off [default] On Erase No ADAPTiQ audio calibration performed. Uses ADAPTiQ system adjustments established using Disc 2. Eliminates the ADAPTiQ system adjustments* when this selection is followed, within 5 seconds, by pressing the Erase button on the media center control panel. Bose® link [default] Legacy Communicates only with Bose link-compatible products in other areas or rooms of your house. Allows the system to communicate with Bose legacy products (like Wave® radios or Wave® radio/CDs, which pre-date Bose link compatibility) and with some non-Bose products in other areas or rooms of your house. Bose 5.1 [default] TV Stereo Allows you to hear cable/satellite or VCR audio in Bose 5.1 surround sound. Sends 2-channel HDMI audio from your cable box, satellite receiver, or VCR to your TV speakers. * Elimination of ADAPTiQ system adjustments is NOT automatically reversible. Restoring these adjustments requires performing the ADAPTiQ audio calibration system again using Disc 2. For information on how to use this process, refer to "Getting Started" in your Installation Guide. Through use of this advanced feature, the LIFESTYLE® system self-adjusts its audio processing to compensate for the furnishings, speaker placement, and positions of listeners to provide ideal sound in your main room. Video options Press System on the LIFESTYLE® remote control. Move right to see a preview of video features, and press the Enter button to move into the active list of video options. Figure 18 Preview of video features Video Select Video to adjust these system options: TV Power TV Power Status Widescreen TV Widescreen DVDs Video Connector Video Black Level TV Video Format Progressive Scan Video Resolution Persistent Video Settings on TV Menu Options TV Power TV Power Status (Indicator only; not a setting) Widescreen TV navigate select Option Settings Automatic [default] Manual Euro TV Not Detected or TV On No [default] Yes Settings Descriptions TV turns on automatically when a video source is selected. This feature only works after the TV on/off sensor is properly installed. Refer to "Using the TV on/off sensor" in your Installation Guide. TV does not turn on automatically. TV responds to SCART connector input. Indicates TV Sensor is not installed or not positioned correctly. Indicates TV Sensor is installed and functioning properly. Adjusts your system to work with a normal (4:3) TV screen size. Adjusts your system to work with a widescreen (16:9) TV. 37