Bose Acoustimass 15 Series II Owner's guide - Page 5

Figure 1 Carton contents Setting Up 20-ft (6.1m) system input cable Powered Acoustimass® module Three 20-ft (6.1m) front speaker cables Rubber feet for front center cube speaker array With Acoustimass 15 Series II system With Acoustimass 16 system Five cube speaker arrays Six cube speaker arrays Two 50-ft (15.2m) rear speaker cables Three 50-ft (15.2m) rear speaker cables USA/Canada Power cord (1) Europe UK/Singapore Australia Placing your speakers to achieve realistic home theater sound A suggested home theater layout is shown in Figure 2. You may want to place the speakers differently to take advantage of the sound characteristics of different rooms. Here are some suggested guidelines for placing your speaker system: • The cube speaker arrays are identical and can be used for any channel. • All cube speaker arrays are magnetically shielded to prevent interference with a TV picture. • The top and bottom sections of the cube speaker arrays can be rotated to create room-filling sound patterns (Figure 3). • Bose® wall brackets and floor stands can extend your placement options. See "Accessories" on page 17. Please follow wall bracket instructions carefully. Proper mounting will ensure optimum performance and safety from your system. Note: The Acoustimass 15 Series II may be upgraded by adding a center rear cube speaker array. See "Upgrading your Acoustimass 15 Series II speaker system" on page 12. 5 AM264924_00 _V.pdf • August 13, 2002