Bose Acoustimass 5 Series II Owner's guide - Page 7

Ideally, positioning, Acoustimass`-5, Series, system, sound

Page 7 highlights

o Ideally positioning your Acoustimass`-5 Series II system to get the best sound One of the real benefits of your Acoustimass-5 system is its flexibility. For instance, the cube arrays of your Acoustimass-5 system are magnetically shielded for use with video systems. This allows you to position the cube arrays close to your TV or monitor without adversely affecting the picture quality (as happens with conventional, unshielded speakers). Cube considerations A. In average-sized listening rooms, the best stereo effects result when the left and right cube arrays are spaced 6 to 12 feet apart (approximately 1.8-3.6 m). However, you can still achieve excellent results with separation as little as 3 feet (approximately 1m) or as great as 15 feet (approximately 4.5 m). Note: For video applications, separation can be less than 3 feet. While this may slightly reduce performance, it will allow the cube arrays to be located on each side of a Ts/ or monitor. B. Though there is no "correct' position for the cube arrays or the angle between them, the most lifelike sound will be achieved by providing a balance of direct and reflected sound. Experiment with the positions of the cubes for the results you prefer. Figure 4 shows some typical cube arrangements. You may choose to use the cube arrays with both cubes facing forward. This eliminates the benefits of combining direct and reflected sound, but may be appropriate for very small listening areas. Acoustimass module considerations Unlike conventional floor standing or bookshelf speakers, you can also fine-tune. the bass response of your Acoustimass-5 system without compromising accurate stereo imaging. Just change the locationof the Acoustimass module within your listening room. For typical listening environments, positioning the module along a wall 3 to 5 feet (approximately 1 to 1.5 meters) from a corner provides a normal balance of frequencies from your Acoustimass-5 system. Moving the module close to the walls and/or corners of your room will increase bass response, while moving it toward the center of your room will decrease it. In most rooms, it should be reasonably easy to choose a location that is convenient, yet provides pleasing bass response. Note: While the cube arrays are shielded, the Acoustimass module is not shielded and should always be placed at least 2 feet from any monitor or television. • 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

o
Ideally
positioning
your
Acoustimass`-5
Series
II
system
to
get
the
best
sound
One
of
the
real
benefits
of
your
Acousti-
mass-5
system
is
its
flexibility.
For
instance,
the
cube
arrays
of
your
Acoustimass-5
system
are
magnetically
shielded
for
use
with
video
systems.
This
allows
you
to
position
the
cube
arrays
close
to
your
TV
or
monitor
without
adversely
affecting
the
picture
quality
(as
happens
with
conven-
tional,
unshielded
speakers).
Cube
considerations
A.
In
average
-sized
listening
rooms,
the
best
stereo
effects
result
when
the
left
and
right
cube
arrays
are
spaced
6
to
12
feet
apart
(approximately
1.8-3.6
m).
However,
you
can
still
achieve
excellent
results
with
separation
as
little
as
3
feet
(approximately
1
m)
or
as
great
as
15
feet
(approximately
4.5
m).
Note:
For
video
applications,
separation
can
be
less
than
3
feet.
While
this
may
slightly
reduce
performance,
it
will
allow
the
cube
arrays
to
be
located
on
each
side
of
a
Ts/
or
monitor.
B.
Though
there
is
no
"correct'
position
for
the
cube
arrays
or
the
angle
between
them,
the
most
lifelike
sound
will
be
achieved
by
providing
a
balance
of
direct
and
reflected
sound.
Experiment
with
the
positions
of
the
cubes
for
the
results
you
prefer.
Figure
4
shows
some
typical
cube
arrangements.
You
may
choose
to
use
the
cube
arrays
with
both
cubes
facing
forward.
This
eliminates
the
benefits
of
combining
direct
and
reflected
sound,
but
may
be
appropriate
for
very
small
listening
areas.
Acoustimass
module
considerations
Unlike
conventional
floor
standing
or
bookshelf
speakers,
you
can
also
fine-tune.
the
bass
response
of
your
Acoustimass-5
system
without
compromising
accurate
stereo
imaging. Just
change
the
location
of
the
Acoustimass
module
within
your
listening
room.
For
typical
listening
environ-
ments,
positioning
the
module
along
a
wall
3
to
5
feet
(approximately
1
to
1.5
meters)
from
a
corner
provides
a
normal
balance
of
frequencies
from
your
Acoustimass-5
system.
Moving
the
module
close
to
the
walls
and/or
corners
of
your
room
will
increase
bass
response,
while
moving
it
toward
the
center
of
your
room
will
decrease
it.
In
most
rooms,
it
should
be
reasonably
easy
to
choose
a
location
that
is
convenient,
yet
provides
pleasing
bass
response.
Note:
While
the
cube
arrays
are
shielded,
the
Acoustimass
module
is
not
shielded
and
should
always
be
placed
at
least
2
feet
from
any
monitor
or
television.
6