Bose L1 Model 1S With B2 Bass Module English Owners Guide - Page 12

Svenska Nederlands Italiano FSrvaennçsakias NeEdsepralañnodl s FDItreaulnitaçsnacoihs DEDseapunatssñckohl English SYSTEM SETUP Connecting the B1 or B2 bass module You can place the B1 or B2 bass module either vertically or horizontally on the floor. It fits neatly bewteen the legs of the power stand. 1. Plug one end of the B1 or B2 bass module cable into one of the bass connectors. Rotate the plug clockwise to lock it in place. You should hear a soft click as it locks. 2. Plug the other end of the cable into the Bass Module Out connector on the power stand. Rotate the plug clockwise to lock it. Note: To disconnect a B1 or B2 cable, slide back the metal tab on the body of the plug, rotate the plug counterclockwise, and pull it out of the connector. Figure 5 B1 B2 B1 and B2 bass modules Bass Module Out Bass Module Out CAUTIONS: • DO NOT connect any bass module other than the B1 or B2 to the power stand. • DO NOT substitute the supplied cable with a 2-wire speaker cable. Use only the supplied B1 bass module 4-wire cable to connect the B1 bass module to the power stand. The power stand uses the signals on two of the wires to automatically sense how many B1 or B2 bass modules are connected. • DO NOT connect a B1 or B2 bass module to two power stands at the same time. 12