Bose L1 Pro16 Portable Line Array Multilingual Owners Guide - Page 6

System Setup System Setup Connections and Controls q w VOLUME TREBLE BASS REVERB VOLUME TREBLE BASS REVERB VOLUME TREBLE BASS e r MUTE INST MUTE INST MUTE t y u PUSH SYSTEM EQ OFF SPEECH i o a 6 • English PRO.BOSE.COM q Channel Parameter Control: Adjust the level of volume, treble, bass, or reverb for your desired channel. Press the control to switch between parameters; rotate the control to adjust the level of your selected parameter. w Signal/Clip Indicator: The LED will illuminate green when a signal is present and will illuminate red when the signal is clipping or the system is entering limiting. Reduce the channel or signal volume to prevent signal clipping or limiting. e Channel Mute: Mute the output of an individual channel. Press the button to mute the channel. While muted, the button will illuminate white. h r Channel ToneMatch Button: Select the ToneMatch preset for an individual channel. Use MIC for microphones and use INST for acoustic g guitar. The corresponding LED will illuminate white while selected. f t Channel Input: Analog input for connecting microphone (XLR), instrument (TS unbalanced), or line level (TRS balanced) cables. d y Phantom Power: Press the button to apply 48- volt power to channels 1 and 2. The LED will illuminate white while phantom power is applied. u USB Port: USB-C connector for Bose service use. s Note: This port is not compatible with Thunderbolt 3 cables. i XLR Line Output: Use an XLR cable to connect the line-level output to a Sub1/Sub2 or another bass module. o ToneMatch Port: Connect your L1 Pro to a T4S or T8S ToneMatch mixer via a ToneMatch cable. CAUTION: Do not connect to a computer or phone network. a Power Input: IEC power cord connection. s Standby Button: Press the button to power on the L1 Pro. The LED will illuminate white while the system is on. d System EQ: Press the button to scroll through and select a master EQ suitable for the use case. The corresponding LED will illuminate white while selected. f TRS Line Input: Use a 6.4-millimeter (1/4-inch) TRS cable to connect line-level audio sources. g Aux Line Input: Use a 3.5-millimeter (1/8-inch) TRS cable to connect line-level audio sources. h B luetooth® Pair Button: Set up pairing with Bluetooth capable devices. The LED will flash blue while the L1 Pro is discoverable and illuminate solid white when a device is paired for streaming. L1 Pro8/Pro16 Portable Line Array System • Owner's Guide