Bose L1 Pro8 Portable Line Array English Owners Guide - Page 2

Important Safety Instructions Please read and keep all safety, security, and use instructions. Important Safety Instructions Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the ­apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNINGS/CAUTIONS This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock. This symbol on the product means there are important operating and maintenance instructions in this guide. Contains small parts which may be a choking hazard. Not suitable for children under age 3. This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device. Use at altitude less than 2000 meters only. • Do NOT make unauthorized alterations to this product. • Do NOT use in vehicles or boats. • Do NOT place the product in a confined space such as in a wall cavity or in an enclosed cabinet while in use. • Do NOT place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat registers or other apparatus (including amplifiers) that produce heat. • Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product. • To reduce the risk of fire or electrical shock, do NOT expose the product to rain, liquids, or moisture. • Do NOT expose this product to dripping or splashing and do not place objects filled with liquids, such as vases, on or near the product. • Do NOT use a power inverter with this product. • Provide an earth connection or ensure the socket outlet incorporates a protective earthing connection before connecting the plug to the mains socket outlet. • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 2 • English PRO.BOSE.COM Regulatory Information The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013. Required Power State Information Power consumption in specified power mode, at 230V/50Hz input Power Modes Standby Networked Standby ≤ 0.5 W N/A* Time after which equipment is automatically switched into mode 4 hours N/A* Power consumption in networked standby if all wired network ports are connected and all wireless N/A* network ports are activated, at 230V/50Hz input Network port deactivation/activation procedures. Deactivating all networks will enable standby mode. *Product does not utilize a networked standby mode for a Bluetooth® connection and does not have the ability to be configured to a network via Wi-Fi® or Ethernet L1 Pro8 L1 Pro16 Dimensions (H × W × D) 200.5 × 31.8 × 44 cm (78.9 × 12.5 × 17.3 in) 201.2 × 35.5 × 45.6 cm (79.2 × 14.0 × 18.0 in) Net Weight 17.3 kg (38.2 lb) 22.9 kg (50.6 lb) Input Rating 100-240 VAC, 1 A, 50/60 Hz 100-240 VAC, 3 A, 50/60 Hz Initial turn on inrush current 15.8 A at 120 V; 30.1 A at 230 V 15.7 A at 120 V; 28.4 A at 230 V Inrush current after AC mains interruption of 5 s 1.2 A at 120 V; 19.4 A at 230 V 2.4 A at 120 V; 8.1 A at 230 V This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body. The product label is located on the bottom of the product. Model: L1 Pro8/L1 Pro16. The CMIIT ID is located on the bottom of the product. CAN ICES-3 (B)/NMB-3(B) Information About Products That Generate Electrical Noise (FCC Compliance Notice for US) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Bose Corporation could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules and with ISED Canada's license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. L1 Pro8/Pro16 Portable Line Array System • Owner's Guide