Bose L1 Pro8 Portable Line Array English Owners Guide - Page 9

PRO.BOSE.COM System Setup Channel 3 Controls Channel 3 is for use with Bluetooth® enabled devices and line-level audio inputs. Bluetooth Pairing The following steps describe how to manually connect a Bluetooth enabled device to stream audio. You can use the L1 Mix app to access additional device control. For more information on the L1 Mix app, see L1 Mix App Control below. 1. Turn on the Bluetooth feature on your mobile device. 2. Press and hold the Bluetooth Pair Button for two seconds. When ready to pair, the LED will flash blue. 3. Your L1 Pro will be visible in your device list on your mobile device. Select your L1 Pro from the device list. When the device pairs successfully, the LED will illuminate solid white. Note: Some notifications may be audible through the system while in use. To prevent this, disable notifications on your connected device. Enable airplane mode to prevent call/message notifications from interrupting audio. TRS Line Input A mono input. Use a 6.4-millimeter (1/4-inch) TRS cable to connect line-level audio sources, such as mixers or instrument effects. Aux Line Input A stereo input. Use a 3.5-millimeter (1/8-inch) TRS cable to connect a line-level audio source, such as mobile devices or laptops. L1 Mix App Control Download the Bose L1 Mix app for additional device control and audio streaming. Once downloaded, follow the instructions in the app to connect your L1 Pro. For specific information on how to use the L1 Mix App, see the in-app help. Features • Adjust channel volume • Adjust channel mixer parameters • Adjust system EQ • Enable channel mute Owner's Guide • L1 Pro8/Pro16 Portable Line Array System • Enable reverb mute • Enable phantom power • Access to ToneMatch preset library • Save scenes English • 9