Bose LS38BK Installation Guide - Page 25

BASIC SYSTEM CONNECTIONS English Español Français Figure 21 Using the AdaptiQ® calibration headset Media center connection panel BASIC SYSTEM CONNECTIONS AUX Headset 2. Put on the headset so it rests above your ears. In this position, it can listen (as you would) and take sampling measurements in your room during the ADAPTiQ audio calibration process. 3. Follow the calibration process as directed on the TV screen. Save the headset for possible future use Keep the headset and discs together in their original carton and store them in a safe location. You may want to customize your system again if you move it to another room or significantly change the arrangement of the room by relocating furniture, the speakers, or the  Acoustimass® module. You can reuse the ADAPTiQ system at any time. Taking the next steps This completes the basic connection of your system and TV. Now you can: • Make the audio connection from the LIFESTYLE® media center to the TV, if you have not yet done so. Please refer to "Making an audio connection to the TV" on page 20. Also be sure to disconnect the media center and the Acoustimass module from power before making additional connections. • Install the TV on/off sensor, following instructions in the next section of this guide. • Connect other components to the system, as instructed on page 29 of this guide. • Use the system as it is now set up. Refer to your Operating Guide for details. 25