Bose S1 Pro Wireless PA Multilingual Owners Guide - Page 40

W ireless T ransmitter Controls CHANGE BETWEEN MIC AND LINE INPUT With the Bose Wireless Mic/Line ­Transmitter, you can change between mic and line input settings to match the input requirements of your source. To do so, press and hold the Power button I and MUTE button until the ­transmitter icon on the channel display changes to reflect the new input setting. MUTE VOLUME LINE VOLUME LINE Mic input Line input CONNECT EFFECTS TO A CHANNEL INSERT WHEN ­USING A WIRELESS TRANSMITTER When you connect a wireless transmitter to a channel which has the Insert setting set to Auto (see page 41), the l (6.35 mm) TRS channel input becomes a series ­channel insert (also known as an effects loop). You can connect effects units or pedals to the input using an insert cable, all while using your instrument or mic wirelessly. For sample setup scenario images, see page 47. NOTES: • An insert cable (l or 6.35 mm TRS to dual l or 6.35 mm TS) is required to ­connect an effects unit to a channel insert. You can purchase an insert cable at your local music retailer. • Don't connect an instrument or other audio source to the input using a standard l (6.35 mm) cable when a wireless transmitter is connected to the channel. This prevents audio from playing from both the wired and wireless source. | 4 0 E N G