Bose Solo 15 Series II TV Sound Owner s Guide - Page 6
Placing the system, Cable options, Connecting your TV
View all Bose Solo 15 Series II TV Sound manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Setting up the System Placing the system 1. Move your TV so you can see the Audio Out panel. 2. Place the Solo 15/10 series II system where you had your TV. Cable options Connect your TV to the system using one of the three cable options. The optical cable is the preferred method for connection. Tip: If your TV does not have an optical, coaxial or analog connector, see page 15. 1. On the back of your TV, locate the Audio OUT (digital) connector panel. Note: You must connect the audio cable through your Audio OUT connector panel. Your TV's connector panel may not appear as shown. Look for the shape (optical) or color of the connector. Placement guidelines: If placing the sound system in a cabinet or on a shelf, position the front of the system as close as possible to the front edge of the shelf for optimum audio performance. CAUTIONS: • If placing the sound system backed up to a wall, make sure there is a space of at least 1" (2.5 cm) between the wall and the rear of the system. • With any placement of this product, make sure the ventilation openings on the rear panel are not blocked. Option 1: Optical (digital) Preferred method for connection. Option 2: Coaxial (digital) Use if no optical output is available. 2. Choose an audio cable. Option 3: Analog (stereo) Use this connection if no optical or coaxial outputs are available. Connecting your TV Insert one end of the audio cable into the correct Audio OUT (digital) connector on your TV. CAUTION: If using an optical cable, remove the protective caps from both ends. Inserting the plug in the wrong orientation can damage the plug and/or the connector. 6 - English