Bose SoundTouchStereo JC Series II Wi-Fi Owners Guide - Page 16

Setting up the System Connect the speakers What you need: Acoustimass® Module Speaker cables Note: See "Appendix A: Acoustimass® connector panel" on page 31 for details. 1. Lay the Acoustimass® module on its side. Insert the L (gray) speaker cable into the L (gray) connector on the Acoustimass® module. 2. Insert the other end of the L (gray) speaker cable into the left speaker ­connector, with the label facing down. 3. Insert the R (blue) speaker cable into the R (blue) connector on the ­Acoustimass® module. 4. Insert the other end of the R (blue) speaker cable into the right speaker ­connector, with the label facing down. 5. Reconnect the Acoustimass® module power cord to AC (mains) power. Left (L, gray) Right (R, blue) Right speaker Left speaker Acoustimass® module Note: You can place system speakers on wall brackets, table stands or floor stands. To purchase these accessories, contact your local Bose® dealer or visit ­www.Bose.com. 16 - English