Bose SoundTouchStereo JC Series II Wi-Fi Owners Guide - Page 20

Using the System Playing music with the SoundTouch™ controller During the setup process, you were prompted to connect the SoundTouch™ controller to the system. If your SoundTouch™ controller is not connected, launch the SoundTouch™ app and click EXPLORE > SETTINGS > Systems, select your system, and click CONNECT SOUNDTOUCH CONTROLLER. You can use the SoundTouch™ controller to play and manage your Presets. Note: The SoundTouch™ controller must be within 70 feet (21 m) of the ­SoundTouch™ wireless adapter in wood-construction homes. In concrete, stucco or brick homes, the range will likely be less and may vary. The ­number of other active wireless devices in the home may affect range. ­Ideally, there should be no more than one wall or ceiling between the ­controller and the wireless adapter. SoundTouch™ icon Presets ring Skip backward Skip forward Screen Volume ring Using the SoundTouch™ controller • Press a Preset to play it. Press and hold a Preset to personalize it. • Move your finger around the Presets ring to view Presets. • Turn the Volume ring to adjust the volume. • Touch or to skip through content. • Press and hold the screen to turn the SoundTouch™ system on and off. • Press the screen to play or pause music. • Touch and hold the SoundTouch™ icon to disconnect the controller from a ­system. To connect to another system, refer to the help system in the app. Note: If the controller is in power saving mode, wave your hand within 6 in. (15 cm) above the screen to turn it on. 20 - English