Bose SoundTouchStereo JC Series II Wi-Fi Owners Guide - Page 32

Apendices Appendix B: Wall mounting the SoundTouch™ wireless adapter You can mount the adapter on a wall (hardware not included). See "Mounting ­hardware specifications" for the correct hardware. Mounting hardware specifications Item Wall thickness Wood 1 in. (25.4 mm) or thicker Wallboard ⅜ in. (9.5 mm) or thicker Drill bit ⅛ in. (3.17 mm) ³/16 in. (4.76 mm) Pan-head wood screws (2) #8x1¼ in. (32 mm) #8x1¼ in. (32 mm) Plastic wall anchors (2) Not used #6-8x1 in. (25.4 mm) If the mounting hardware instructions differ from these instructions, follow the mounting hardware instructions. There are two ways to mount the adapter: • Vertically; connector panel facing left • Horizontally; connector panel facing up 6¼ in. (159 mm) center-to-center 1. Drill two holes 6¼ in. (159 mm) center-to-center. 2. Insert plastic wall anchors (if mounting to wallboard). 3. Install pan-head wood screws. Note: Leave the screw heads ¼ in. (6.35 mm) above wall surface. 4. Position adapter onto the screws. 32 - English