Boss Audio BV7280 User Manual in English - Page 18

OPERATION 3) AUDIO SETUP When you open the AUDIO menu, you will see the following picture: DIGITAL SETUP OP MODE DYNAMIC RANGE DUAL MONO AUDIO SETUP AUDIO OUT KEY *AUDIO OUT: Change among SPDIF/OFF, SPDIF/RAW and SPDIF/PCM. * KEY: Change the tone within a cert ain range. 4) VIDEO SETUP When you open the VIDEO menu, you will see the following picture: VIDEO SETUP BRIGHTNESS CONTRAST HUE SATURATION SHARPNESS You can adjust the value of the brightness, contrast, hue, saturation and sharpness. 5) SPEAKER SETUP When you open the SPEAKER menu, you will see the following picture: SPEAKER SETUP DOWNMIX FRONT * DOWNMIX: to set the DOWNMIX modes of LT/RT and STEREO. * FRONT: to select between LARGE and SMALL. 6) DIGITAL SETUP When you open the DIGITAL menu, you will see the following picture: * OP MODE: to set the operating modes for Dolby Digital decoder, there are LINE OUT and RF REMOD to be selected. * DYNAMIC RANGE: you can adjust the dynamic range between OFF, 1/8, 2/8. 3/8, 1/2, 5/8, 3/4, 7/8, full. * DUAL MONO: there are STEREO, MONO L, MONO R and MIX MONO to be selected. Note: The displayed se tting information is different according to different version. ◆ On-screen Display Function Press the OSD button on the remote control or on the unit during playback to display the console information of the current file on the screen, such as the remaining time and the played time. ◆ Last Play Memory 1) During media play back, if you turn of f the unit and then turn on the unit again, the unit will resume playing from the point that just interrupted. 2) During playback, if you press MODE button to switch to other mode, then return to media play mode again, the unit will resume playing from the point that just interrupted. MEMORY CARD OPERATION On the front of the unit, when you open the USB cover, you will see a memory card interface. You can insert a memory card into the interface. When you insert a memory card in the memory interface, the unit will search 16