Boss Audio BV9348B User Manual - Page 8

Radio Operation 1. Enter/exit Touch [Radio] icon in the main interface to enter into the radio interface. Touch icon to return to main interface, and then touch other function icons so as to exit radio mode. 2. Mute: Click icon, mute on/off. 3. Band selection Click icon so as to switch among FM1, FM2, FM3, AM1, AM2 bands. 4. Search/Save radio stations Short press icon to browse the stored radio stations. FM band can save 18 radio stations (Six stations for FM1/ FM2/FM3), AM band can save 12 radio stations (Six stations for AM1/AM2). 5. Sound setting: Click icon to access sound setting interface. 6. Turn on/off the Long/Short-range Click icon, the search pattern in the local search (LOC) and remote search (DX) switch between. LOC feature is turned on after the signal is strong enough only to listen to those in good condition and receiving radio station; DX enabled, you can receive remote weak radio signals. Note: This function is available only when FM band is selected. 7. Loudness on/off Click icon so as to turn on/off loudness function. 8. Stereo on/off When receiving stereo signals, click icon to turn on/off stereo. 9. TA (Receive traffic information) ON: When the traffic station is turned on, the radio will automatically search for traffic stations. After a station is searched, screen displays "TP". Only when traffic information is broadcasted can it be received, after traffic information is completed, the radio will automatically switch to the previous mode. OFF: Repress [TA] button to close TA function. In other modes, traffic announcement will automatically switch to radio mode, after the traffic announcement is completed, it will automatically switch to the previous mode. 10. AF Touch the button to turn the AF function on/off. AF function is turned on, When the received station signals become weak, the radio will automatically fine-tune to other frequencies. When receiving an emergency announcing, the screen will display warning message. 11. PTY Touch the button the screen displays program types, users can search station according to program type. Note: If the unit does not have RDS function, it has no AF/TA/PTY function. 07 BT Operation 1. Enter/exit Touch [BT] icon in the main interface to enter the BT interface. Touch icon to exit BT interface. 2. Pair/link To use BT hand-free function, make connection first, i.e. match the host with the BT mobile phone. Operation methods: Set the host to be matching state, and open the BT of your mobile phone and use the mobile phone to search device, the mobile phone shall prompt to match password with the BT when it has searched the BT device. Input BT password (0000) to the mobile phone and confirm. The mobile phone shall prompt whether authorize to this device, please select [Yes]. Phone and BT shall automatically connect within 20 seconds. Under any working mode, the host shall convert to BT state if there is an incoming call. And the host shall restore to current mode after hanging up. When the BT device matches with this device, the connection status shall display " LINK OK ", otherwise, it shall display " NO LINK ". 3. Dialing You can dial on mobile phone directly or input phone number through the number buttons on the screen, click to delete if there is input error. After input the phone number, click to make a call, and click to hang up the phone. Click during a call so as to switch the voice between car speaker and mobile phone. 4. Call records Click to access call records interface. Touch this button to check all the phone numbers of received calls. Touch this button to check all the dialed phone numbers. Touch this button to check all the phone numbers of missed calls. 5. BT music Click to access BT music interface. Previous song Play/Pause Next song 08