Bowflex BodyTower Assembly Manual

Bowflex BodyTower Manual

Get Bowflex BodyTower PDF manuals and user guides View all Bowflex BodyTower manuals
Add to My Manuals
Save this manual to your list of manuals

Bowflex BodyTower manual content summary:

  • Bowflex BodyTower | Assembly Manual - Page 1
    ® ® Bowflex® BodyTower™ Assembly Manual Manual en Español Latino Americano: http://www.bowflex.com
  • Bowflex BodyTower | Assembly Manual - Page 2
    Instructions 3 Specifications 4 Parts ...5 Hardware 6 Tools...6 Assembly Steps 7 Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service Inc. (www.NautilusInc.com) trademarks include NAUTILUS®, BOWFLEX®, SCHWINN® and UNIVERSAL® and respective logos. Other
  • Bowflex BodyTower | Assembly Manual - Page 3
    by Nautilus. Failure to use genuine replacement parts can cause a risk to users, keep the equipment from operating correctly and void the warranty. • Do not use until the equipment has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. • Read and
  • Bowflex BodyTower | Assembly Manual - Page 4
    surface. Allow a workout area of minimum 123" x 123" (3.1m x 3.1m). Follow these basic points when you assemble your equipment: 1. Read and understand the "Important Safety Instructions" before assembly. 2. Collect all the pieces necessary for each assembly step. 3. Using the recommended wrenches
  • Bowflex BodyTower | Assembly Manual - Page 5
    9 12 7 11 Parts 4 5 6 10 8 3 2 1 Ref. Qty Description 1 1 Base Cross Brace 2 1 Base Frame, Left 3 1 Base Frame, Right 4 2 Upright 5 1 Backbone 6 1 Back Pad Assembly Ref. Qty Description 7 1 E-Z Adjust Arm, Left 8 1 E-Z Adjust Arm, Right 9 1 Pull Up Bar 10 1 Exercise Placard 11 2 Handgrip 12 2
  • Bowflex BodyTower | Assembly Manual - Page 6
    Hardware Guide A B C D E F G H I J K Ref. Qty Description A 6 Button Head Hex Screw M8 X 35 B 4 Carriage Bolt M8 X 55 C 4 Button Head Hex Screw M8 X 60 D 2 Carriage Bolt M10 X 55 E 4 Acorn Nut
  • Bowflex BodyTower | Assembly Manual - Page 7
    Assembly Steps Step 1: Attach Base Cross Brace to Base Frames Note: Do not tighten the hardware until the parts of the base are together. Make sure that the square on the bolt is in the square hole (1a) on the Base Cross Brace. Do
  • Bowflex BodyTower | Assembly Manual - Page 8
    Assembly Steps Step 2: Attach Uprights to Cross Brace Note: D o not completely tighten the hardware at this time. 4 X4 A G H 8
  • Bowflex BodyTower | Assembly Manual - Page 9
    Assembly Steps Step 3: Attach E-Z Adjust Arms to Back Pad Assembly 6 7 8 9
  • Bowflex BodyTower | Assembly Manual - Page 10
    put it on the Uprights. If necessary, remove end caps from the Uprights. Grasp the assembly near the Uprights and tilt it to move clear of the height adjustment holes in the Uprights. Carefully slide it down the Uprights. Note: The scratch guard strips on the front of the Uprights help to
  • Bowflex BodyTower | Assembly Manual - Page 11
    Assembly Steps Step 5: Install the Pull Up Bar to the Uprights Note: Move the E-Z Adjust Bar to the bottom of the Uprights and tighten the hardware at the base of the Uprights completely. Then move the E-Z Adjust Bar to the top of the Uprights and tighten the hardware on the Pull Up Bar. Make
  • Bowflex BodyTower | Assembly Manual - Page 12
    Assembly Steps Step 6: Install the Backbone to the Pull Up Bar and Base Note: Attach the Backbone to the Pull Up Bar first. For the carriage bolts at the base, you can put a piece of tape on each bolt head to hold it in position
  • Bowflex BodyTower | Assembly Manual - Page 13
    Assembly Steps Step 7: Install Placard on Backbone 10 13
  • Bowflex BodyTower | Assembly Manual - Page 14
    Assembly Steps Step 8: Attach Handgrips and Sling Straps 12 11 14
  • Bowflex BodyTower | Assembly Manual - Page 15
    all fasteners are tight, the equipment is level, and components are properly assembled. Do not use the equipment until the equipment has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. Note: R ecord serial number in the Serial Number field at the
  • Bowflex BodyTower | Assembly Manual - Page 16
    Nautilus® Bowflex® Schwinn® Fitness 004-4693-111811C Universal®
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Assembly Manual
Manual en Español Latino Americano:
http://www.bowflex.com
Bowflex
®
BodyTower
™
®
®