Bowflex BodyTower Assembly Manual - Page 7
Assembly Steps - parts
View all Bowflex BodyTower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Assembly Steps Step 1: Attach Base Cross Brace to Base Frames Note: Do not tighten the hardware until the parts of the base are together. Make sure that the square on the bolt is in the square hole (1a) on the Base Cross Brace. Do not install the hardware that joins the left and right Base Frames at this time. X4 E G 2 H 3 B 1 X4 1a B 7
Assembly Steps
Note:
Do not tighten the hardware until the parts of the base are together. Make sure that
the square on the bolt is in the square hole (1a) on the Base Cross Brace.
Do not
install the hardware that joins the left and right Base Frames at this time.
Step 1:
Attach Base Cross Brace to Base Frames
B
H
G
E
1
2
3
X4
X4
1a
B
7