Bowflex BodyTower Assembly Manual - Page 12
Step 6, Install the Backbone to the Pull Up Bar and Base
View all Bowflex BodyTower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Assembly Steps Step 6: Install the Backbone to the Pull Up Bar and Base Note: Attach the Backbone to the Pull Up Bar first. For the carriage bolts at the base, you can put a piece of tape on each bolt head to hold it in position during installation. Tighten the outer bolts first. Tighten all hardware. Slide the E-Z Adjust Bar up and down to be sure it moves easily on the Uprights. X2 A G H 5 X2 J K I D 12
Assembly Steps
Step 6:
Install the Backbone to the Pull Up Bar and Base
5
A
D
G
H
J
K
I
X2
X2
Note:
Attach the Backbone to the Pull Up Bar first. For the carriage bolts at the base, you can
put a piece of tape on each bolt head to hold it in position during installation. Tighten the
outer bolts first.
Tighten all hardware. Slide the E-Z Adjust Bar up and down to be sure it moves easily on
the Uprights.
12