Bowflex BodyTower Assembly Manual - Page 10
Step 4, Install the E-Z Adjust Bar Assembly on the Uprights - height
View all Bowflex BodyTower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Assembly Steps Step 4: Install the E-Z Adjust Bar Assembly on the Uprights Remove the Locking Pins (7a) from E-Z Adjust brackets before you install the assembly on the Uprights. Tilt the assembly to put it on the Uprights. If necessary, remove end caps from the Uprights. Grasp the assembly near the Uprights and tilt it to move clear of the height adjustment holes in the Uprights. Carefully slide it down the Uprights. Note: The scratch guard strips on the front of the Uprights help to protect the finish during assembly. NOTICE: Be careful to avoid damage to the plastic sliders inside the E-Z Adjust brackets. Be sure that the E-Z Adjust Bar assembly fully engages the holes in the Uprights. Insert the Locking Pins (7a) through the holes in the brackets to lock the E-Z Adjust Bar in position on the Uprights. 7a 7a 10