Brother International 1750 Users Manual - English and Spanish - Page 19
Size Function
UPC - 012502600022
View all Brother International 1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
SIZE FUNCTION The character size can be adjusted using the Size function. The following table shows the character sizes. Size SIZE 1 SIZE 2 SIZE 3 SIZE 4 SIZE 5 AUTO Character Standard Size Double Width Double Height Double Width & Double Height 4 × Width & Double Height 1/4" (6 mm) tape: SIZE 1 3/8" to 3/4" (9 mm to 18 mm) tape: SIZE 4 The default size setting is AUTO. The currently selected size setting is always shown by the indicator above the display. SIZE 1 SIZE 2 SIZE 3 SIZE 4 SIZE 5 Sample When 6 mm tape is installed and SIZE 3, 4 and 5 is set for horizontal printing or SIZE 2, 4 and 5 is set for vertical printing, the "CHR_SIZE:AUTO?" message will display. Press h to print in the AUTO size. To change the size setting: 1 While holding down f, press 1 once, and keep f held down to display the current size setting. 2 While still holding down f, continue pressing 1 until the desired size setting is displayed and is shown by the size indicator. The current character size setting is also shown by the size indicator above the display. 3 Release f to apply the selected size setting to the entire text. 17