Brother International 1960C Quick Setup Guide - English - Page 10

Print quality check

Get Brother International 1960C - IntelliFAX Color Inkjet PDF manuals and user guides
UPC - 012502615897
View all Brother International 1960C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Setting Up the Machine 7 Print quality check 1 After the cleaning cycle is finished, the LCD shows: Set Paper and q Press Start 2 Make sure paper is loaded in the paper tray. Press Color Start. The machine starts printing the Print Quality Check Sheet (only during initial ink cartridge installation). 3 Check the quality of the four color blocks on the sheet. (black/ yellow/ cyan/ magenta) Improper Setup Avoid touching the printed surface of the paper immediately after printing, the surface may not be completely dry and may stain your fingers. 4 The LCD shows: Is Quality OK? q 1.Yes 2.No 5 Do one of the following: „ If all lines are clear and visible, press 1 (Yes) on the dial pad to finish the quality check. „ If you can see missing short lines, press 2 (No) on the dial pad and go to step 6. OK Poor 6 The LCD asks you if the print quality is OK for black and color. Press 1 (Yes) or 2 (No) on the dial pad. Black OK? q 1.Yes 2.No Color OK? q 1.Yes 2.No After pressing 1 (Yes) or 2 (No) for both black and color, the LCD shows: Start Cleaning? q 1.Yes 2.No 7 Press 1 (Yes), the machine will then start cleaning the colors. 8 After cleaning is finished, press Color Start. The machine starts printing the Print Quality Check Sheet again and goes back to step 3. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
Setting Up the Machine
8
7
Print quality check
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
q
Press Start
2
Make sure paper is loaded in the paper tray.
Press
Color Start
.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3
Check the quality of the four color blocks on the
sheet.
(black/ yellow/ cyan/ magenta)
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
q
1.Yes 2.No
5
Do one of the following:
If all lines are clear and visible, press
1
(
Yes
) on the dial pad to finish the quality
check.
If you can see missing short lines, press
2
(
No
) on the dial pad and go to step
6
.
6
The LCD asks you if the print quality is OK for
black and color. Press
1
(
Yes
) or
2
(
No
) on the
dial pad.
Black OK?
q
1.Yes 2.No
Color OK?
q
1.Yes 2.No
After pressing
1
(
Yes
) or
2
(
No
) for both black
and color, the LCD shows:
Start Cleaning?
q
1.Yes 2.No
7
Press
1
(
Yes
), the machine will then start
cleaning the colors.
8
After cleaning is finished, press
Color Start
.
The machine starts printing the Print Quality
Check Sheet again and goes back to step
3
.
OK
Poor