Brother International 1960C Quick Setup Guide - English - Page 6

Setting Up the Machine 3 Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size. 7 Close the output paper tray cover (1) and slide it forward. 1 2 4 Fan the stack of paper well to avoid paper jams and misfeeds. 1 Note If you are using Legal size paper, the paper tray cover does not slide all the way to the end of the paper tray. 8 Slowly push the paper tray completely into the machine. 5 Gently put the paper into the paper tray print side down and top edge first. Check that the paper is flat in the tray. 9 While holding the paper tray in place, pull out the paper support ( ) until it clicks and unfold the paper support flap ( ). 2 1 6 Gently adjust the paper side guides with both hands and the paper length guide to fit the paper. Make sure that the paper side guides and paper length guide touch the edges of the paper. Note Do not use the paper support flap for Legal size paper. Note Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause paper feed problems. 4