Brother International 1960C Quick Setup Guide - English - Page 15
Installing the battery, See Data and Time in the Digital Cordless
UPC - 012502615897
View all Brother International 1960C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting Up the Machine 15 Installing the battery 1 Insert the connector (1) of the battery (2) in the direction shown below. 2 16 Charging the battery 1 Place the cordless handset on the cradle with the dial pad facing forward. 1 2 Place the battery in the position shown. 3 Install the battery cover by sliding it onto the back of the handset. Note • After installation, you should set the date and time. (See Data and Time in the Digital Cordless Handset User's Guide.) • The LCD of the handset will display "Searching for Base Unit" or "Base Unit not detected" until the initial setup of the machine is complete. • If the battery charge level is getting low, you should charge the battery. You can see the battery charge level indicator at the bottom right of the LCD. Note • Be careful that you do not catch the battery connector cord. 4 Charge the batteries by leaving the cordless handset in the cradle for at least 12 hours before you use it. You can continue to set up the handset during this time. 13