Brother International 3200c Users Manual - English - Page 61
Setting Date and Time, Setting Station ID, DATE/TIME, YEAR:XX, MONTH:XX, DAY:XX, TIME:XX:XX
UPC - 012502604921
View all Brother International 3200c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Setting Date and Time Your MFC displays the date and time, and prints it on every fax you send. In the event of a power failure, you may have to reset the date and time. All other settings remain unaffected. 1 Press Menu/Set, 1, 3. 2 Enter the last two digits of the year, and then press Menu/Set. 3.DATE/TIME YEAR:XX 3 Enter two digits for the month (for example, enter 09 for September, or 10 for October), and then press Menu/Set. MONTH:XX 4 Enter two digits for the day (for example, 06), and then press Menu/Set. DAY:XX 5 Enter the time in 24-hour format (for example, enter 15:25 for 3:25 P.M.), and then press Menu/Set. TIME:XX:XX 6 Press Stop/Exit. The LCD now displays the date and time you set whenever the MFC is in Standby mode. Setting Station ID You can store your name, fax number and telephone number in this setting. The name and fax number will be printed on the fax cover pages and all fax pages that you send. 1 Press Menu/Set, 1, 4. 4.STATION ID 2 Enter your fax number (up to 20 digits), and then press Menu/Set. You must enter a fax number to proceed. FAX: 3 Enter your telephone number (up to 20 digits) and press Menu/Set. If your telephone number and fax number are the same, enter the same number again. TEL: The telephone number you enter is used only for Cover Page features. (See Composing Electronic Cover Page, page 7-7.) 4 Use the dial pad to enter your name (up to 20 characters), and then press Menu/Set. (See Entering Text, page 5-3.) 5 Press Stop/Exit. The LCD returns to the date and time. NAME: If your Station ID has already been programmed, the LCD prompts 1 to make a change, or 2 to exit without changing. INITIAL SETUP 5-2