Brother International 8050N Quick Setup Guide - English - Page 15
Installing the Face-up Output Tray
 |
UPC - 012502608189
View all Brother International 8050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Step 1 Setting Up Your Printer 8 Replace the lid of the paper tray. The lid of the tray must be firmly seated. If not, the paper might be misaligned. 9 Put the paper tray back into the printer. 3 Installing the Face-up Output Tray The installation of the tray is optional and is only necessary if you want to do face up printing. Be sure to switch off the power and unplug the power cord from the outlet before carrying out the following steps. 1 Insert the right and left tabs of the face-up output tray into the holes at the back of the printer. Face-up output tray Load paper in the lower paper tray in the same way. If you want to print to the face-up output tray, push up lever (1) and pull out the extension tray (2). Extension tray 14
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
 |
 |
14
Setting Up Your Printer
Step 1
8
Replace the lid of the paper tray.
9
Put the paper tray back into the printer.
Be sure to switch off the power and
unplug the power cord from the
outlet before carrying out the
following steps.
1
Insert the right and left tabs of the face-up
output tray into the holes at the back of the
printer.
If you want to print to the face-up output tray,
push up lever (1) and pull out the extension
tray (2).
The lid of the tray must be firmly seated. If
not, the paper might be misaligned.
Load paper in the lower paper tray in the
same way.
3
Installing the Face-up
Output Tray
The installation of the tray is optional
and is only necessary if you want to
do face up printing.
Face-up output tray
Extension tray