Brother International 8050N Quick Setup Guide - English - Page 37

Setting Up Your Printer Windows® USB Windows® Parallel Installing the Driver Windows® Network ■ For Administrators Setting your IP Address, Subnet Mask and Gateway (Using the Control panel) Your printer is configured to receive an IP address, Subnet mask and Gateway address from a DHCP server. If you do not use a DHCP server follow the steps below. -MENUNETWORK 1 Press until NETWORK= is displayed. 2 Press . 3 Press again. NETWORK TCP/IP TCP/IP IP ADDRESS= 4 Press until IP ADDRESS= is displayed. 5 Press . IP ADDRESS= 0. 0. 0. 0* IP ADDRESS= 192. 0. 0. 6 Enter the IP address for this printer using or . (for example 192) 0 IP ADDRESS= 192. 0. 0. 7 Press and move the cursor to the next value. 0 8 Repeat Steps 6 and 7 to finish setting the IP address. IP ADDRESS= 192.168.001.100 9 Press to complete the IP address. An asterisk mark (*) appears on the LCD. IP ADDRESS= 192.168.001.100* 0 Press until SUBNET MASK= is displayed. TCP/IP SUBNET MASK= A Press . SUBNET MASK= 0. 0. 0. 0* B Set your subnet mask in the same way as the IP address. An asterisk mark (*) appears on the LCD. SUBNET MASK= 255.255.255.000* C Press until GATEWAY= is displayed. TCP/IP GATEWAY= D Press . GATEWAY= 0. 0. 0. 0* E Set your gateway address in the same way as the IP address. An asterisk mark (*) appears on the LCD. GATEWAY= 192.168.001.254* F Press to put the printer back into its READY. READY Macintosh ® USB Macintosh ® Network Fo r Administrators 36