Brother International 8100h User Guide - Page 103
Use the BRCONFIG command or TELNET command: SET NETWARE, SET SERVICE service TREE tree
![]() |
UPC - 012502601166
View all Brother International 8100h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
CHAPTER 9 NOVELL NETWARE PRINTING 18. Execute the BRCONFIG from the Windows® menu or insert the CDROM that came with your MFC into the CD-ROM Drive of your PC and type: X:BRCONFIG (X: is the drive letter of your CD-ROM Drive). Select the Print / Fax server from the list of Print / Fax servers. When you get the message that the Print / Fax server is connected, press the ENTER key and type the default password of "access" in response to the "#" prompt (the password will not echo), and then press the ENTER key again in response to the ENTER Username> prompt. When you get the Local> prompt, type: SET SERVICE service TREE tree SET SERVICE service CONTEXT Context • Where tree is the NDS tree name. • Where context is the name of context where the Print / Fax server resides. • Service is the name of the service assigned by NetWare Print / Fax server name (where the default services are BRN_xxxxxx_P1 for the Brother printer, where "xxxxxx" is the last six digits of the Ethernet address (MAC address). • You can also enter the TREE and CONTEXT name using your web browser by connecting to the Brother Print / Fax server using the TCP/IP protocol and selecting the NetWare protocol configuration. 19. Use the BRCONFIG command or TELNET command: SET NETWARE RESCAN to force the Print / Fax server to rescan for file servers, or power cycle the printer. The same services assigned by NetWare Print / Fax server names cannot be used for both queue server mode and remote printer mode. The same service assigned by NetWare Print / Fax server cannot be used for both queue server mode and remote printer mode. If you want to enable remote printer capabilities on a service other than the default NetWare service, you must define new services that are enabled for NetWare and for the desired port. Refer to Appendix B in this manual for information on how to do this. 9-15
![](/manual_guide/products/brother-international-8100h-user-guide-c35364b/103.png)