Brother International 8360P Owners Manual - Page 58
Remote Commands, Change Fax Forwarding Setting, Retrieve or Erase a Fax, Check the Receiving Status
View all Brother International 8360P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Remote Commands Follow the commands below to access features remotely. When you call the machine and enter your Remote Access Code (the factory setting is 1 5 9 ), the system will signal you with two short beeps to enter a remote control command. Change Fax Forwarding Setting Press 9 5 then to Turn Fax Forwarding OFF-Press 1. Turn Fax Forwarding ON-Press 2. Program Fax Forward Number-Press 4. Automatically turns Fax Forwarding ON. Turn Fax Storage ON-Press 6. Turn Fax Storage OFF-Press 7. (This is only possible if there are no faxes stored in the memory, or if all faxes have been erased using Remote Control 9 6 3). Retrieve or Erase a Fax Press 9 6 then to Retrieve all faxes-Press 2, then enter the number of remote fax machine and then press # #. After the beep, hang up and wait. Erase all fax messages-Press 3. If the data stored in the memory has not been printed before, it will be printed first and then erased. Check the Receiving Status Press 9 7 then Press 1. 1 long beep-Received fax messages. 3 short beeps-No messages. Change Receive Mode Press 9 8 then for TAD-Press 1. F/T (FAX/TEL)-Press 2. FAX-Press 3. Exit Remote Operation Press 9 0 50 Chapter 9