Brother International ADS-1000W Network Users Guide - Page 66
Question, Interface, Solution, ADS-1000W/ADS-1100W
View all Brother International ADS-1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Troubleshooting Question Interface Solution How can I check the link status of my Brother machine? wireless (ADS-1000W/ADS-1100W) If the WiFi light on the Control Panel does not light up, the LEDs show an error status. Make a note of the error status, see LED Indications in the User's Guide, and then correct the error. (ADS-1500W/ADS-1600W) Check the Status in WLAN Status is not Connection Failed. See How to Check the WLAN Status on page 10. If the LCD message shows Connection Failed, ask your network administrator whether your IP address is valid or not. Can you "ping" the Brother machine from your computer? wireless Ping the Brother machine from your computer by entering the IP address or the node name at the Windows® command prompt: ping or . Successful i Your Brother machine is working correctly and connected to the same network as your computer. Unsuccessful i Your Brother machine is not connected to the same network as your computer. 7 (Windows®) Ask your network administrator and use the Network Connection Repair Tool to fix the IP address and the subnet mask automatically. For more information about the Network Connection Repair Tool, see Is your Brother machine assigned with an available IP address? in The Brother machine cannot scan over the network. The Brother machine is not found on the network even after successful installation. on page 58. (Macintosh) Confirm the IP address and the Subnet Mask are set correctly. See Confirm the IP address and the Subnet Mask in The Brother machine cannot scan over the network. The Brother machine is not found on the network even after successful installation. on page 58. Is the Brother machine connecting to the wireless network? wireless (ADS-1000W/ADS-1100W) If the WiFi light on the Control Panel does not light up, the LEDs show an error status. Make a note of the error status, see LED Indications in the User's Guide, and then correct the error. (ADS-1500W/ADS-1600W) Check Status in WLAN Status. See How to Check the WLAN Status on page 10. If the LCD message shows Connection Failed, ask your network administrator whether your IP address is valid or not. I have checked and tried all of the above, however, I'm still having problems. Is there anything else I can do? wireless See the instructions supplied with your WLAN access point/router to find the SSID and the Network Key information and set them correctly. For more information about the SSID and the Network Key, see Are your security settings (SSID/Network Key) correct? in I cannot complete the wireless network setup configuration. on page 56. 63