Brother International BAS-300G Instruction Manual - English - Page 46
Using the production counter
View all Brother International BAS-300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 6-5. Using the production counter 1 While pressing the TEST key, press the key. • The counter value that was previously set will appear as a 7-digit number in the PROGRAM No. display and the menu display. TEST indicator and SPEED indicator illuminate COUNTER indicator flashes 4464Q 4465Q 2 Press the or key to set the counter value. • The counter value can be set to between "000" "0000" and "999" "9999". • If you press the RESET key during setting mode, the value will become "000" "0000". 3 Ending setting mode Press the TEST key. • The counter value will be memorized. 4466Q TEST indicator switches off If you press the SELECT key (1) to select the counter display menu when memory switch no. 300 is set to "ON", the SPEED and COUNTER indicators will illuminate and the production counter will appear in the menu display (2). 1. Each time the sewing of a single article is completed, the value shown in the menu display (2) is increased by 1. 2. While the key (3) is being pressed, the first three digits will appear in the PROGRAM No. display (4) so that the total number of digits displayed will be seven. 3. If you press the RESET key (5) for 2 seconds or more, the counter value will be reset to [0000]. 4468Q Temporary display function You can display the production counter temporarily while the lower thread counter is being displayed. When the SPEED indicator is illuminated, hold down the TEST key (6) and then press the RESET key (5) to display the production counter in the menu display (2). Press the TEST key (6) or the SELECT key (1) to switch the menu back to the normal menu display. * You can start sewing while the temporary display still appears. 37 BAS-300G, BAS-311G, BAS-326G