Brother International BAS-300G Instruction Manual - English - Page 48
Using user programs
View all Brother International BAS-300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 6-7. Using user programs Up to 50 different combinations of settings including program no., X-scale, Y-scale, sewing speed, work clamp height and intermittent presser foot height can be memorized as user programs (U1 to U50). (However, the work clamp height setting is only enabled for motor-driven work clamp specifications.) If you are sewing certain patterns over and over again, it is useful to record the settings for these patterns into a user program. User programs are enabled when memory switch no. 400 is set to "ON". 1 Select a user program number. While pressing the TEST key, press the SELECT key. • Switch to user program recording mode. Check that the menu indicators are flashing. • The user program number will appear in the PROGRAM No. display, and " P- - - " will appear in the menu display. Press the or key to select the user program number. TEST indicator illuminates, MENU indicator flashes 4469Q 2 First, set the program number. Press the or key to set the user program number to be recorded. NOTE: Select a program number that is recorded in the internal memory. You cannot specify program numbers on removable media. 3 Next, set the X-scale. Press the SELECT key. 4966Q 4 Next, set the Y-scale. Press the or key to set the X-scale to be recorded. X-SCALE indicator flashes Press the SELECT key. 4470Q Press the or key to set the Y-scale to be recorded. Y-SCALE indicator flashes 5 Next, set the sewing speed. Press the SELECT key. 4472Q Press the recorded. SPEED indicator flashes or key to set the sewing speed to be 4474Q 39 BAS-300G, BAS-311G, BAS-326G