Brother International BAS-311F-0 Instruction Manual - English - Page 58
Adjusting the needle up stop position, detection function and should not be loosened.
View all Brother International BAS-311F-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
9. STANDARD ADJUSTMENTS 9-11. Adjusting the needle up stop position The needle up stop position is adjusted so that the index mark (2) on the machine pulley (1) is inside the mark (4) on the belt cover (3). If adjustment is necessary, loosen the screw (5) at the "U" mark of the machine pulley (1) and adjust the position of the machine pulley (1). The machine pulley (1) stops later (3) if it is turned clockwise, and it stops earlier if it is turned counterclockwise. (4) Note (1) The screw (6) is used by the needle down detection function and should not be loosened. (2) (5) The screw (7) is a screw for detecting the machine (6) (7) stop position, and should not be loosened. If the index mark (2) is not inside the mark (4) when be displayed (when memory switch No.14 is on). Turn the machine pulley to move the index mark (2) to the correct position and then start the sewing 1272S machine. BAS-311F-0, 311F-L, 326F-0 51