Brother International BES-963 Instruction Manual - English - Page 48

and turn the tension spring bracket, and turn it.

Get Brother International BES-963 PDF manuals and user guides View all Brother International BES-963 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Chapter 1 Preparation of Embroidery Machine 2. For adjusting the height, loosen the screw q and turn the tension spring bracket w. 3. For adjusting the tension spring force, insert a driver tip in the groove of the thread tension bar e and turn it. To tighten Lower thread tension The standard tension of the lower thread is 0.15~ 0.3N. This tension may vary depending on the used thread. In general, press the bobbin case to a smooth vertical surface and hang the designated number of coins. Turn the thread tension screw so that the lower thread will come out smoothly. Note) Check that the bobbin is pushed out of the bobbin case by about 0.5 mm. If not, the slip prevention spring of the bobbin case does not work. Adjust the spring in height or replace it with a new one. (Refer to "Replacing Bobbin" on page 36.) To loosen 46 BES-963BC • BES-1263BC

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
Chapter 1
Preparation of Embroidery Machine
BES-963BC • BES-1263BC
46
To loosen
To tighten
2.
For adjusting the height, loosen the screw
q
and turn the tension spring bracket
w
.
3.
For adjusting the tension spring force, insert a driver tip in the groove of the thread tension
bar
e
and turn it.
Lower thread tension
The standard tension of the lower thread is
0.15~ 0.3N.
This tension may vary depending on the used
thread.
In general, press the bobbin case to a
smooth vertical surface and hang the
designated number of coins.
Turn the thread
tension screw so that the lower thread will come
out smoothly.
Note)
Check that the bobbin is pushed out of the
bobbin case by about 0.5 mm.
If not, the slip
prevention spring of the bobbin case does not
work.
Adjust the spring in height or replace it
with a new one.
(Refer to
“
Replacing Bob-
bin
”
on page 36.)