Brother International BM3700 Users Manual - English and Spanish - Page 20
Using the needle threader, for models equipped with, a needle threader
View all Brother International BM3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
KNOWING YOUR SEWING MACHINE Put the thread behind the guide above the 8 needle. • The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand. 1 1 Needle bar thread guide Thread the needle from front to back 9 leaving a thread tail of about 5 cm (2 inch). • If your sewing machine is equipped with a needle threader, use the needle threader to thread the needle (see next section). Using the needle threader (for models equipped with a needle threader) This feature is only available on certain models. CAUTION ● The needle threader can be used with a 75/11 through 100/16 home sewing machine needle. However, the needle threader cannot be used with a 65/9 home sewing machine needle. When using special thread such as transparent nylon thread or metallic thread, the needle threader cannot be used. ● Thread with a thickness of 130/120 or thicker cannot be used with the needle threader. ● The needle threader cannot be used with the wing needle or the twin needle. ● If the needle threader cannot be used, refer to "Upper threading" on page 17. Follow steps 1 to 8 from "Upper 1 threading" on page 17 before using the needle threader. Lower the presser foot lever. 2 Make sure that the mark on the wheel 3 points up as shown in the following illustration. 1 1 1 5 cm (2 inch) Note ● Make sure you raise the presser foot lever and the thread take-up lever before you feed the upper thread. ● If you incorrectly feed the thread you may cause sewing problems. 1 Mark on the wheel While lowering the needle threader lever, 4 hook the thread onto the guide. 2 1 1 Needle holder 2 Needle threader lever 19