Brother International CE1100PRW Operation Manual - Page 51
Remove the flat bed attachment and make
View all Brother International CE1100PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Use a chalk to mark on the fabric about 5 mm c (3/16 inch) from the edge of the fabric, and then baste it. 3 5 6 a Wrong side of fabric b Right side of fabric c Edge of fabric d Desired edge of hem 4 e 5 mm (3/16 inch) 1 2 f Basting Slide the part that you wish to sew onto the i arm, make sure that the fabric feeds correctly, and then start sewing. 1 2 1 2 a Arm Position the fabric with the edge of the folded j hem against the guide of the presser foot, and Fold back the fabric inside along the basting. d then lower the presser foot lever. 3 a Wrong side of fabric 3 5 b Right side of fabric c Edge of fabric 4 6 d Desired edge of hem e 5 mm (3/16 inch) R 12 f Basting g Basting point 1 7 1 Unfold the edge of fabric, and position the e fabric with the wrong side facing up. a Wrong side of fabric b Fold of hem c Guide Adjust the stitch width until the needle k slightly catches the fold of the hem. 4 1 6 1 1 a Wrong side of fabric b Right side of fabric 3 c Edge of fabric d Desired edge of hem 1 e Basting point f Basting 1 5 2 R 1 a Needle drop point When you change the needle drop point, raise the needle, and then change the stitch width. Stitch width Attach blind hem foot "R". f Select a stitch. g Remove the flat bed attachment and make h free-arm sewing possible. • For details on free-arm sewing, refer to "Stitching cylindrical pieces" (page 44). a Thick fabric b Normal fabric 49