Brother International CE1100PRW Operation Manual - Page 54
Use chalk to mark the position and length
View all Brother International CE1100PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
UTILITY STITCHES The names of parts of buttonhole foot "A", which is used for sewing buttonholes, are indicated below. 1 2 5 ■ If the button does not fit in the button guide plate Add together the diameter and thickness of the button, and then set the button guide plate to the calculated length. (The distance between the markings on the presser foot scale is 5 mm (3/16 inch).) 1 3 4 A a Button guide plate b Presser foot scale c Pin d Marks on buttonhole foot e 5 mm (3/16 inch) Use chalk to mark the position and length of a the buttonhole on the fabric. 2 1 a Marks on fabric b Buttonhole sewing Pull out the button guide plate of buttonhole b foot "A", and then insert the button that will be put through the buttonhole. 2 3 a Presser foot scale b Length of buttonhole (Diameter + thickness of button) c 5 mm (3/16 inch) Example: For a button with a diameter of 15 mm (9/16 inch) and a thickness of 10 mm (3/8 inch), the button guide plate should be set to 25 mm (1 inch) on the scale. 1 2 a 10 mm (3/8 inch) b 15 mm (9/16 inch) Attach buttonhole foot "A". c Select a stitch. d Pass the upper thread down through the hole e in the presser foot. A X The size of the buttonhole is set. 52