Brother International CE1100PRW Operation Manual - Page 55
Pull down the buttonhole lever as far
View all Brother International CE1100PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Position the fabric with the front end of the f buttonhole mark aligned with the red marks on the sides of the buttonhole foot, and then lower the presser foot lever. 1 Gently hold the end of the upper thread in h your left hand, and then start sewing. 2 A 2 a Mark on fabric b Red marks on buttonhole foot • When lowering the presser foot, do not push in the front of the presser foot, otherwise the buttonhole will not be sewn with the correct size. Note ● If thick seams are being sewn and the fabric does not feed, sew with the coarser (longer) stitch. X Once sewing is completed, the 3 machine automatically sews reinforcement stitches, then stops. Raise the needle and the presser foot lever, i remove the fabric, and cut the thread. Raise the buttonhole lever to its original j position. a Do not reduce the gap. Pull down the buttonhole lever as far as g possible. a Buttonhole lever The buttonhole lever is positioned behind the bracket on the buttonhole foot. a Buttonhole lever b Bracket 53