Brother International CP-7500 Users Manual - English - Page 57
Button sewing
View all Brother International CP-7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Button sewing Buttons can be sewn on with the sewing machine. Buttons with 2 or with 4 holes can be attached. Measure the distance between the holes in the a button to be attached. Place a button between the presser foot and d the fabric. Raise the presser foot lever, and then slide the b feed dog position lever, located at the rear of the machine on the base, to (to the right as seen from the front of the machine). • When attaching four-hole buttons, first sew the two holes closest to you. Then, slide the button so that the needle goes into the two holes toward the rear of the sewing machine, and then sew them in the same way. 3 a Feed dog position lever (as seen from the rear of the machine) Select a stitch . (With models not provided e with stitch , select stitch .) Adjust the stitch width so that it is the same as f the distance between the holes in the button. Set the stitch length to the shortest setting by g pressing the stitch length adjustment key. X The feed dogs are lowered. Attach presser foot "M". c 1 a Button fitting foot "M" 55